Trade Prompt Pack • 4 Field-Tested Prompts

AI Prompts for House Painting Quotes & Prep Estimates.

Copy-ready ChatGPT, Claude, and Gemini prompts for residential and commercial painters to itemize surface prep, gallon coverage, coat counts, and drywall exclusions.

Why this prevents commercial disputes

Painting disputes almost always stem from vague 'paint 3 rooms' quotes that omit sanding, stain-blocking primer, ceiling cut-ins, and paint tier specs. These prompts convert room dimensions and substrate conditions into clear labor vs. gallon allowances.

PROMPT 01 • ChatGPT / Claude / Gemini

Itemize Interior Wall, Trim & Prep Labor Separate from Paint Gallons

Use Case & Commercial Purpose: Separates invisible drywall patching and sanding hours from finish coat labor and exact gallon allowances so homeowners understand the bid.

Copy-Ready Prompt

Act as an honest residential painting estimator. Turn my site notes into a clear, itemized painting proposal ready for QuoteFast.

Rules:
1. Separate Surface Prep Labor, Finish Application Labor, and Paint/Primer Materials.
2. Calculate gallons transparently using ~350 sq ft per gallon per coat (include a 10% cut-in/waste buffer).
3. List 3 explicit exclusions (e.g., ceilings, closet interiors, or structural drywall replacement if not included).

Inputs:
- Client Name: [Client Name]
- Areas: [e.g., Living room, hallway, 2 bedrooms — 1,400 sq ft wall area]
- Prep Needed: [e.g., patch 10 nail pops, caulk baseboards, spot-prime water stain]
- Paint Spec: [e.g., Sherwin-Williams Duration Matte, 2 coats]
- Labor Rate & Hours: [e.g., 22 hrs @ $65/hr]

Sample AI Output

1. Surface Preparation & Masking (Labor — 6 hrs @ $65/hr): $390.00
- Cover floors/furniture, patch 10 drywall nail pops, caulk baseboard gaps, spot-prime water stain with shellac primer.

2. Finish Application — Walls (Labor — 16 hrs @ $65/hr): $1,040.00
- Apply 2 full finish coats to 1,400 sq ft of living room, hallway, and bedroom walls.

3. Paint & Primer Allowance (Materials — 10% cut-in buffer included): $430.00
- 8 gal Matte Interior Paint (1,400 sq ft × 2 coats ÷ 350 sq ft/gal) + 1 gal stain-blocking primer + tape/caulk.

Explicit Exclusions: Ceilings, closet interiors, and exterior window frames are excluded unless added via written change order.

Ethical & Transparency Checkpoint

Always specify the exact number of finish coats and the paint product tier in writing; '2 coats' vs. '1 coat over primer' changes both labor and material cost.

PROMPT 02 • ChatGPT / Claude / Gemini

Write an Exterior Painting Scope Addressing Peeling Wood & Rot Discovery

Use Case & Commercial Purpose: Protects painters from eating the cost of hidden rotted fascia or siding discovered only after pressure washing and scraping begin.

Copy-Ready Prompt

Draft an exterior painting scope for [Client Name] covering [Siding/Trim Areas, e.g., cedar clapboard siding and fascia].

Include:
- Pressure washing, scraping loose paint, feather-sanding, and oil-based bonding primer on bare wood.
- A clear "Wood Rot Discovery Clause" stating that rotted boards found behind peeling paint will be photographed and quoted for replacement before painting over them.

Sample AI Output

EXTERIOR PREP & FINISH SCOPE — [Client Name]
1. Wash & Dry: Low-pressure wash all siding and trim; allow 48 hours drying time before priming.
2. Scrape & Prime: Hand-scrape failing paint, feather-sand edges, and apply 1 coat oil-based bonding primer to all exposed bare wood.
3. Finish: Apply 2 coats exterior 100% acrylic satin to siding and semi-gloss to trim.

Wood Rot Discovery Clause: This quote covers surface prep and painting only. If scraping or washing exposes softened or rotted fascia/siding boards, we will pause that section, send photos, and issue a written carpentry repair option for your approval before painting.

Ethical & Transparency Checkpoint

Never paint over damp or rotted wood to stay on schedule; pausing with photo proof protects the homeowner's investment.

PROMPT 03 • ChatGPT / Claude / Gemini

Set Realistic Cure-Time & Grain-Visibility Expectations for Kitchen Cabinets

Use Case & Commercial Purpose: Prevents post-job complaints about oak grain texture or early door-slam chipping before 2K/urethane enamel fully cures.

Copy-Ready Prompt

Write a plain-English Cabinet Refinishing Expectations & Care section for [Client Name]'s [Wood Species, e.g., oak or maple] kitchen cabinet quote ([Door/Drawer Count] fronts). Cover degreasing, scuff-sanding, 2K urethane cure time (14–21 days), and natural wood grain visibility unless grain-filling is added.

Sample AI Output

CABINET REFINISHING SPECIFICATIONS ([Door/Drawer Count] Fronts)
- Prep: Industrial degrease, scuff-sand, tack-cloth wipe, and 2 coats shellac/urethane stain-blocking primer.
- Finish: Spray-applied 2 coats pigmented 2K waterborne urethane enamel.
- Wood Grain Notice: Paint seals and colors the wood but does not erase natural open oak grain unless optional grain-filling is added.
- Cure Window: Doors are dry to the touch at reinstall, but full chemical hardness takes 14–21 days—avoid slamming or scrubbing during this window.

Ethical & Transparency Checkpoint

Disclose open-grain visibility and cure-time vulnerability before spraying so clients know what a factory-style finish actually looks and feels like.

PROMPT 04 • Any LLM

Explain Why a Dramatic Color Change Requires a Third Coat

Use Case & Commercial Purpose: Explains fairly why switching from dark navy/red to off-white (or unapproved mid-job color changes) requires an extra primer or finish coat.

Copy-Ready Prompt

Write a polite 4-sentence note to [Client Name] explaining that switching from [Old Color] to [New Color] requires [1 tinted primer coat + 2 finish coats / a 3rd finish coat] for true coverage, costing [Extra Amount] in labor and paint.

Sample AI Output

Hi [Client Name], because we are transitioning from [Old Color] to [New Color], standard two-coat coverage will still allow underlying tones to bleed through. Adding [1 tinted primer coat / a 3rd finish coat] ensures even, streak-free color depth. The exact addition is [Extra Amount] (materials + labor); please reply "Approved" if you would like me to include it.

Ethical & Transparency Checkpoint

Explain pigment opacity physics simply and never charge for extra coats if you failed to inspect the existing wall color during walkthrough.

FAQ

Common questions about painting prompts

How many square feet does one gallon of interior paint cover in an estimate?

Standard interior architectural paint covers roughly 350 to 400 square feet per gallon per coat on smooth drywall, or 250 to 300 square feet on textured or porous surfaces, plus a 10% cut-in and roller-nap waste allowance.

Should painters separate prep labor from finish coats on a quote?

Yes. Separating patching, caulking, sanding, and priming from finish coats shows homeowners why thorough prep takes time and prevents disputes over excluded drywall repairs.

What should be excluded on a standard residential painting quote?

Common exclusions include ceilings, closet interiors, moving heavy appliances/pianos, rotted exterior wood replacement, and lead/asbestos abatement on pre-1978 structures unless explicitly itemized.

QuoteFast Workflow

Paste your generated scope into a clean PDF proposal.

Once your AI assistant formats the line items, open the Material Waste & Surplus Calculator or launch the proposal generator to export PDF/PNG on-device.

Open Painting Proposal Maker

Explore other prompt packs

View all 18 packs →