Trade Prompt Pack • 4 Field-Tested Prompts

AI Prompts for Plumbing Estimates, Repipes & Water Heater Quotes.

Copy-ready ChatGPT, Claude, and Gemini prompts for licensed plumbers to separate fixtures, brass shutoffs, code expansion tanks, and concealed-wall exclusions.

Why this prevents commercial disputes

Plumbing quotes create disputes when code-required thermal expansion tanks, shut-off valves, or finish drywall repairs remain unspoken. These prompts force clear separation between piping materials, licensed labor hours, municipal permits, and access restoration limits.

PROMPT 01 • ChatGPT / Claude / Gemini

Itemize a Water Heater Replacement with Code Upgrades & Haul-Away

Use Case & Commercial Purpose: Shows homeowners why a licensed installation includes a thermal expansion tank, brass shutoff valve, pan drain, and sediment trap rather than just swapping a tank.

Copy-Ready Prompt

Act as an ethical, licensed residential plumber. Convert my water heater notes into an itemized proposal ready for QuoteFast.

Rules:
1. Separate Water Heater & Code Upgrade Materials from Installation & Haul-Away Labor.
2. Specify tank warranty tier, expansion tank, quarter-turn brass ball shut-off, and drain pan explicitly.
3. Add a clear note stating whether municipal plumbing permits are pass-through or itemized.

Inputs:
- Client Name: [Client Name]
- Unit Spec: [e.g., 50-gallon natural gas water heater, 6-yr tank warranty]
- Code Items: [e.g., 2.0-gal thermal expansion tank, 3/4" brass PRV, galvanized pan, gas sediment trap]
- Labor & Haul-Away: [e.g., 4.5 hrs @ $145/hr]

Sample AI Output

WATER HEATER & PRV PROPOSAL — [Client Name]
1. Water Heater & Code Materials: $1,490.00
- 50-gal natural gas commercial-grade water heater (6-yr OEM tank warranty)
- 2.0-gal pre-charged thermal expansion tank, galvanized flood pan, quarter-turn brass shut-off valve, gas sediment trap, and 3/4" lead-free main PRV

2. Licensed Installation & Haul-Away Labor (4.5 hrs @ $145/hr): $652.50
- Drain & haul away failed unit, solder/press water/gas tie-ins, purge air, test static PSI (65 PSI target), and verify leak-free startup.

Permits & Exclusions: Municipal plumbing permit pass-through fee ($125 if required by city). Finish drywall repair around attic/utility access excluded.

Ethical & Transparency Checkpoint

Always verify static water pressure and disclose expansion tank requirements upfront so manufacturer warranties remain valid.

PROMPT 02 • ChatGPT / Claude / Gemini

Set Clear Drywall & Tile Restoration Boundaries for Whole-Home Repipes

Use Case & Commercial Purpose: Prevents homeowners from assuming a PEX-A supply repipe includes full mudding, sanding, texture matching, and painting of wall access cutouts.

Copy-Ready Prompt

Write a clean, respectful Scope & Exclusions section for [Client Name]'s whole-home [PEX-A / Copper] repipe quote ([Bathroom/Fixture Count]). Explain wire/pipe routing cuts cleanly, pressure testing (80 PSI), and why finish drywall/tile restoration remains separate.

Sample AI Output

REPIPE SCOPE & WALL ACCESS BOUNDARY
- Included Scope: Replace hot and cold distribution lines with [PEX-A] manifold system, install new quarter-turn brass angle stops, flush lines, and complete an 80 PSI static pressure test.
- Wall Access & Finish Boundary: Our crew minimizes drywall/plaster cutouts to neatly reach concealed supply risers and leaves all work areas broom-clean. Because finish mudding, drywall texture matching, painting, and custom tile restoration require specialized finish trades, those repairs are excluded from this plumbing contract unless quoted separately.

Ethical & Transparency Checkpoint

Walk through expected wall access locations with the homeowner before cutting so there are zero finish-wall surprises.

PROMPT 03 • ChatGPT / Claude / Gemini

Pause & Report Concealed Pipe Corrosion Found Inside Walls or Slabs

Use Case & Commercial Purpose: Protects plumbers from unpaid stack replacements when opening a shower wall exposes crumbled 1960s cast-iron or galvanized drain lines.

Copy-Ready Prompt

Write a calm, non-alarmist field message to [Client Name] explaining that opening the [Bathroom Wall / Slab] uncovered severe internal corrosion on [Affected Drain/Supply Pipe], attaching photos and quoting the transparent repair cost ([Extra Cost]).

Sample AI Output

Hi [Client Name], while opening the [Bathroom Wall] for the rough-in today, we uncovered heavily corroded [1960s galvanized/cast-iron drain stack] (photos attached). Because it was buried behind tile, this wasn't visible during our initial inspection. Connecting new piping directly onto flaking metal would risk a future leak inside your wall. Here is the transparent option to replace the damaged section cleanly:
- Repair Cost: [Extra Cost] (materials + labor breakdown)
- Timeline Impact: +[Half Day / 1 Day].
We have paused that branch until you reply "Approved" or inspect it in person.

Ethical & Transparency Checkpoint

Show dated photos and old pipe condition cleanly before repairing; never bury failing legacy piping behind new finishes.

PROMPT 04 • Any LLM

Summarize a Sewer Camera Inspection with Honest Repair Tiers

Use Case & Commercial Purpose: Helps homeowners understand sewer camera findings clearly (root intrusion vs. belly vs. offset joint) without high-pressure scare tactics.

Copy-Ready Prompt

Summarize a main sewer camera diagnostic for [Client Name] at [Address], explaining:
- Issue Found & Distance: [e.g., Fine tree root intrusion at 42 ft in 4" clay lateral]
- Option A (Maintenance / Hydro-Jetting): [Price & Expected Result]
- Option B (Targeted Spot Repair / Cleanout Install): [Price & Expected Result]
- Video Recording Provided: Yes

Sample AI Output

SEWER CAMERA DIAGNOSTIC SUMMARY — [Client Name]
During today's recorded camera inspection (footage emailed via link), we observed [fine tree root intrusion entering a clay pipe joint at 42 ft from the cleanout]. The remaining cast-iron under-slab line appears intact.

Your Two Transparent Options:
- Option A — Hydro-Jetting Flush ([Price]): High-pressure clearing to restore full pipe diameter. Because roots remain outside the joint, periodic clearing may be needed every 12–24 months.
- Option B — Permanent Spot Repair & Exterior Cleanout ([Price]): Excavate at marked 42-ft spot (5 ft deep), splice new Schedule 40 PVC w/ shielded couplings, and install a two-way ground cleanout.

Ethical & Transparency Checkpoint

Always share the unedited camera inspection footage with the homeowner regardless of whether they choose maintenance or permanent replacement.

FAQ

Common questions about plumbing prompts

Why should plumbing proposals list drywall restoration under Exclusions?

Cutting neat wall access openings is part of repiping, whereas finish tape, mud, knockdown texture, painting, and matching porcelain tile require separate finish trades.

What pipe waste percentage should be applied to PEX-A or copper estimates?

Apply a 15% linear-footage buffer on top of measured trunk and fixture drops to accommodate bends, stud penetrations, and manifold routing.

How should municipal plumbing permits appear on client quotes?

Itemize permit and city inspection fees transparently at documented pass-through receipt cost rather than hiding permit buffers inside labor rates.

QuoteFast Workflow

Paste your generated scope into a clean PDF proposal.

Once your AI assistant formats the line items, open the Transparent Scope Matrix or launch the proposal generator to export PDF/PNG on-device.

Open Plumbing Proposal Maker

Explore other prompt packs

View all 18 packs →